Dake Hydraulic controlled feed 7" horizontal mitering bandsaw - 983110-1

 

Mitering bandsaw with dual operating modes and hydraulic controlled down feed. 2.5HP, 120V motor with up to 60°right mitering capabilities. Ergonomic design for operator’s comfort and control. Variable speed with rotary adjusting wheel and "Constant speed control” Maintains constant speed to prevent bog downs when cutting.

 

 

 

• Hydraulic controlled down feed with manual return
• Automatic shut off at the end of the cut
• Dual operating modes, manual cutting or head feed cutting
• Powerful, manual clamping vise, with quick release lever for rapid vise opening and closing action for fast material size change over. The vise clamps material firmly.
• Ergonomic designed for operator’s comfort and control
• Motor gearbox combination bolted to the bow for less vibration
• Variable speed with rotary adjusting wheel and "Constant speed control” Maintains constant speed to prevent bog downs when cutting
• CE Certified electronics. Low voltage switches. Thermo over load protection, low voltage protection with low voltage trigger motor start switch
• Blade tensioning is done via. "Go No Go” tensioning system with LED taking the guess work out of tensioning. Saw will not run if blade tension is not correct
• Miters up to 60° right. Mitering pre-sets with slide stops makes set up fast and has precise with miter scale for all angles in between. The head turns-the material doesn’t
• Horizontally mounted guide arms for more rigidity and straightest cuts. Guides are rollers with carbide inserts that are fully adjustable and replaceable
• Electric coolant pump and self-contained coolant system
• 120 volt means you can use it most anywhere
• Steel fabricated base, and stock stop gauge, one Bi-metal blade

 

 

 

• Steel base
• Blade
• Quick release vice
• 120V Motor

 

 

 

• Part Number: 983110-1
• Capacity: 6.5" Round
• Horsepower: 2.5
• Voltage: 120 V
• Maximum blade speed: Variable
• Blade width: 3/4"
• Blade length: 84 1/4"
• Blade speeds: 114-262 FPM
• Solid round 90° capacity: 6.5"
• Solid round 45° right capacity: 4 1/4"
• Solid round 60° right capacity: 3"
• Solid square 90° capacity: 6 3/4"
• Solid square 45° right capacity: 4 1/2"
• Solid square 60° right capacity: 3"
• Solid rectangle 90° capacity: 7 3/4 x 3"
• Solid rectangle 45° right capacity: 6 x 4 1/4"
• Solid rectangle 60° right capacity: 4 x 2 3/4"
• Bed work (area): 
• worktable Height: 37"
• Height: 65"
• Floor space: 35 x 48"
• Floor space left to right: 35 x 48"
• Floor space front to back: 35 x 48"
• Floor to bed: