Dake Hydraulic controlled 10" dual mitering bandsaw, 220v-3 ph - 983112-2

Dake

$11,401.23
(No reviews yet) Write a Review
SKU:
983112-2
Adding to cart… The item has been added
Dake Hydraulic controlled 10" dual mitering bandsaw, 220v-3 ph - 983112-2
 
Heavy duty, low production saw that comes with one standard Bi-metal blade. Hydraulic controlled downfeed with automatic shut off at the end of the cut. 2.75HP, 220V motor with up to 60°right mitering capabilities. Dual operating modes with head descent control lock switch. Pre-set the down feed and shut switch so down feed does not need resetting after each cut.
 
 
FEATURES:
 
  • Hydraulic controlled down feed with adjustable manual return
  • Automatic shut off at the end of the cut
  • Dual operating modes with head descent control lock switch. Pre-set the down feed and shut switch so down feed does not need resetting after each cut
  • Powerful, flame tempered, manual clamping vise. Hand wheel adjusted with quick release lever for rapid vise opening and closing action. The vise clamps material firmly
  • Traversing vise can be used left or right of the blade
  • Ergonomic designed for operator’s comfort and control
  • Gearbox is direct bolted to the bow for less vibration, and positive drive gear box is direct driven via steel and bronze gears, no belts and pulleys to contend with
  • CE Certified electronics. Low voltage switches. Thermo over load protection, low voltage protection with low voltage trigger motor start switch and blade cover interlock
  • Blade tensioning is done via. A hand wheel and color coded gauge tensioning system taking the guesswork out of tensioning
  • Miters up to 60° right / 45° left. Mitering pre-sets with flip up and pin stops makes set up fast and has precise with miter scale for all angles in between. The head turns-the material doesn’t
  • Horizontally mounted guide arms for more rigidity and straightest cuts. Guides are rollers with carbide inserts that are fully adjustable and replaceable
  • Electric coolant pump and self-contained coolant system
  • Steel fabricated base, and stock stop gauge
 
 
STANDARD EQUIPMENT:
 
  • Steel base
  • 1 standard bi-metal blade
  • Traversing, manual vise
  • Coolant
  • Stock stop gauge
 
 
SPECIFICATIONS:
 
  • Part Number: 983112-2
  • Capacity: 10" Round
  • Horsepower: 2.75
  • Voltage: 220V 3 Phase
  • Maximum blade speed: 230 FPM
  • Blade width: 1"
  • Blade length: 108"
  • Blade speeds: 115-230 FPM
  • Solid round 90° capacity: 10"
  • Solid round 45° right capacity: 8"
  • Solid round 60° right capacity: 5"
  • Solid square 90° capacity: 7 1/2"
  • Solid square 45° right capacity: 7 1/2 / 6 3/4"
  • Solid square 60° right capacity: 5"
  • Solid rectangle 90° capacity: 10 1/2" x 7 3/4"
  • Solid rectangle 45° right capacity: 8 1/4" x 3 1/8"
  • Solid rectangle 60° right capacity: 4 3/4" x 5 1/4"
  • Bed work (area): 
  • worktable Height: 37"
  • Height: 74"
  • Floor space: 28" x 66"
  • Floor space left to right: 28" x 66"
  • Floor space front to back: 28" x 66"
  • Floor to bed: