U.S. Industrial 20" x 120" Precision Geared Head Engine Lathe USL20X120BH-KIT

U.S. Industrial Machinery

$38,990.00
(No reviews yet) Write a Review
SKU:
USL20X120BH-KIT
Adding to cart… The item has been added

Description

This precision, heavy duty geared head engine lathe incorporates hardened and precision ground bedways on longitudinal and cross ways, and wide, precision ground gears. It has a gap-bed design, feed-rod/lead screw safety interlock system, weight bearing tailstock and forward/reverse levers at both the aprons and the head stock.
As with all U.S. Industrial lathes, it comes with a plethora of standard accessories, 3 and 4-jaw chucks, follower and steady rests, 4-way rapid travel, work lamp, a coolant system and an operator/service manual.

Standard Equipment: (Items below are INCLUDED with the machine)

  • 12” 3-jaw chuck. Universal, self-centering with an American standard tongue and groove top Jaws.
  • 16” 4-jaw independent chuck
  • Steady rest
  • 4-way toolpost
  • Thread Dial
  • Work lamp
  • Flood coolant system
  • Sino 2-axis digital readout inch/metric (installed)
  • Inch reading dials on Apron, Cross-Slide and compound
  • Manual with test certificate
  • 25” Face Plate & Dog Plate
  • Foot brake with microswitch and brake
  • Follow rest
  • 4-way rapid travel
  • Safety chuck shield
  • Taper attachment (installed)
  • Large spindle bore to pass 4”
  • Traveling Backsplash Behind Apron
  • Slide out chip pans

Specifications

  • Swing Over Bed: 19.7” (500mm)
  • Swing Over Cross-Slide: 11.8” (300mm)
  • Swing Over Gap: 28” (710mm)
  • Gap Length: 9.44” (240mm)
  • Maximum Workpiece Length with 3-jaw chuck: 118” (3000mm)
  • Maximum Turning Length: 116” (2950mm)
  • Spindle Bore: 4.134” (105mm)
  • Spindle Type: D1-8 Camlock
  • 12 Spindle Speeds: 36 to 1600 RPM
  • 65 Longitudinal Feeds:.0023 to .0937 IPR
  • 65 Cross Feeds: .0011 to .0404 IPR
  • 22 Metric Threads: 1 to 14mm
  • 27 Inch Threads: 2 to 28 TPI
  • 18 Module Threads: 0.5 to 7mm
  • 24 Diametral Pitch Threads: 4 to 56 DP
  • Compound Rest Travel: 5.75”
  • Cross-Slide Travel: 12.125”
  • Tailstock Taper: No. 5 Morse Taper 
  • Tailstock Spindle Travel: 5.906” (150mm)
  • Tailstock Spindle Diameter: 2.953” (75mm)
  • Main Motor HP: 10 HP (7 kw) 220V or 440V, 3-Phase
  • Rapid Feed Motor: 0.4 HP
  • Coolant Pump Motor: .16 HP, 11 gallons per minute
  • Lathe Gross Weight: 7,700 lbs.
  • Dimensions: 183” long, 40” wide, 50” tall

Options

  • Quick Change Toolpost Kit with Holders
  • ISO Cutting Tool Package