Baileigh Mss-18Dt - Deep Throat Shrinker Stretcher

Every shop needs a shrinker stretcher at one time or another, but all of the economical ones on the market suffer from the same issue, throat depth.  Baileigh decided to take a look at that problem and tackle it head on.  Presenting the MSS-18DT deep throat shrinker stretcher.  This little workhorse feature a 2.5" throat depth instead of the industry standard 1.5".  Whats better it comes with 2-heads to save time. No need to switch jaws! 

• 18 gauge mild steel and 16 gauge aluminum capacity.
• 2.5” throat provides that little extra depth for even more versatlitylets you work on the edges of panels.
• Comes assembled with shrinker and stretcher jaws—everything you need to get started.
• Jaws are in separate iron housings, so you don’t have to change tooling between functions.
• Heavy cast iron construction allows the shrinker stretcher to reliably work at full capacity over many years of use.
• Covered by a 1-year parts warranty and lifetime technical supportby phone.
• We keep replacement jaws and other parts in stock, so we can ship them to you quickly.

Recommended for: Entry-level sheet metal shaping, especially in automotive and airplane shops.

Note: Square corner jaws on this model can leave small indents that require additional smoothing. For a shrinker stretcher without square corner jaws, check out the MSS-16F.

Read Less