We've taken our extremely popular G4003G Gunsmith's Lathe and added a precision gearhead mill with 3/4 HP motor to create the ultimate "small footprint" machining station for gunsmiths and machinists alike! But don't let its compact size fool you, this combo lathe/mill really delivers on big machine features, such as a D1-5 lathe spindle and an R-8 mill spindle -- and it comes fully equipped with a huge variety of work-holding and tool-holding equipment and accessories to get you started turning, drilling, milling, chambering, boring, and facing with the best of ’em!
Features:
- 1/2" Square drive in tailstock for use with torque wrench to precisely lock tailstock
- Easy to use lever controls
- ON/OFF reverse switch on carriage
- Ball bearing steady/follow rests
- Outboard spindle "spider" for gunsmithing or long shaft support with 4 brass-tipped screws
- Cast iron stand with extended base
Standard Equipment:
- 6" 3-Jaw chuck with 2-pc. reversible jaws
- 4-Jaw chuck with reversible jaws
- 10" Faceplate
- Steady rest/follow rest with roller tips
- Full length splash guard
- Heavy-duty cast iron stand
- Halogen work light
- Quick-change tool post with included holder
- Two MT#3 dead centers (1 carbide-tipped)
- One MT#3 live center
- Set of seven change gears
- Drill chuck arbor R-8 x B16
- 5/8" Drill chuck
- Spindle sleeve R-8 x MT#3, MT#3 x MT#2
- Toolbox with service tools
Specifications:
- Swing over bed: 12"
- Swing over saddle: 11-5/16"
- Distance between centers: 36"
- Bed width: 7-1/4"
- Lathe spindle bore: 1.57" (39.87mm)
- Lathe spindle taper: MT#5
- Mill spindle taper: R-8
- Tailstock taper: MT#3
- Tailstock barrel travel: 4"
- Cross slide travel: 6-1/4"
- Compound travel: 3-1/4"
- Maximum distance spindle to work table: 12"
- Mill spindle travel: 2-1/4"
- Mill table T-slots: 3/8", 2-7/16" OC
- Maximum lathe tool bit size: 5/8"
- Lathe spindle length: 17"
- Lathe spindle length with 4-jaw chuck: 21-1/4"
- Number of speeds: 9 (lathe), 4 (mill/drill)
- Lathe speed range: 70, 200, 220, 270, 360, 600, 800, 1000, and 1400 RPM
- Mill speed range: 250, 530, 1100, 2300 RPM
- Range of threads (inches): 4 - 112 TPI in 40 steps (Gear changes required)
- Range of threads (metric): 29 @ 0.2 - 4.5mm
- Cuts LH threads
- Lathe motor: 2 HP, 220V, single-phase, 8.5A
- Mill motor: 3/4 HP, 220V, single-phase, 4.5A
- Approximate shipping weight: 1566 lb.
