Description
The Basic Plus is a versatile lathe for single part production. Due to the large selection of optional accessories, this model is the best choice for repair, training, and workshops of all kinds.
Features
- Hardened and ground headstock gears
- Headstock with Camlock D1-4" mount, bore diam. 1.5 in, run in 2 adjustable tapered roller bearings
- Adjustable headstock bearing
- Tailstock can be moved ± 0.4 in for taper turning
- Reversing gear reversing gearbox for changing the feed direction
- Guides are adjustable via tapered gibs
- Cast-iron bed, double v-guide, hardened and ground
- 3-axis position indicator
- More accuracy
- Lower error rate
- Increased productivity
- Resulting in valuable time savings
- For increased productivity
- Easy to read display
- Operator-specific features
- Convenient keyboard layout
- Resolution: 0.0004 / 0.0002"
- Default coordinates
- Axis position is maintained when display is turned off
- Hole circle pattern calculation
- Calculator function
- Storage for 10 tools
- Radius / diameter toggle
- Mm/inch conversion
- Easy expansion and maintenance-free operation
- Display for top (Z0) and box way slide (Z1) both separate and in differential / cumulative mode for lathes
Standard Equipment
- 3-axis position indicator
- 3-jaw chuck Ø 6"
- 4-jaw face plate chuck Ø 8"
- Face plate Ø 10"
- Quick change tool holder WAD 1675
- Quick change tool holder head WA
- Steady and follow rests
- Chip tray
- Fixed splash guard (wall)
- Chuck guard
- Base
- Change gears
- Reducing sleeves
- Dead center
- Micrometer longitudinal stop
- Thread gauge
- Operating tools
- Operator instructions
Specifications
- Working Area
- Turning diameter over bed: 12”
- Turning-Ø over support: 7”
- Bed width: 7”
- Center width: 31.89”
- Travels
- Travel X-axis: 6.1”
- Travel Z1-axis: 4”
- Swing range of top slide: ± 60°
- Headstock
- Spindle mount: Camlock D1-4
- Spindle speed: 60 rpm - 1.550 rpm
- Spindle bore: 1”
- Spindle speed-stages: 9
- Spindle taper: 5 MT
- Feed
- Feed X-axis: 0.00055”/R - 0.01496”/R
- Feed Z-axis: 0.00205”/R - 0.0548”/R
- Tapping
- Tapping, withworth: (34) 4-56 TPI
- Tapping, metric: (26) 0.02" - 0.28"
- Tailstock
- Tailstock taper: 3 MT
- Tailstock quill stroke: 4”
- Tailstock quill diameter: 1”
- Tailstock traverse adjustment: ± 0.5”
- Drive Capacity
- Motor rating main drive: 1.5 Hp
- Measures and Weights
- Overall dimensions (length x width x height): 63” x 30” x 50”
- Weight: 1,144 lbs.
