Knuth 2HP Basic 170 Super Mechanics Lathe 300815

Knuth

$12,895.00
(No reviews yet) Write a Review
SKU:
KN300815
Adding to cart… The item has been added

Description

The Basic 170 Super is a versatile lathe for single part production. Due to the large selection of optional accessories, these models are the best choice for repair, training, and workshops of all kinds

Features

  • Hardened and ground headstock gears
  • Max. spindle speed 2000 rpm
  • Adjustable headstock bearing
  • Cast-iron bed, double v-guide, hardened and ground
  • Interlock to prevent simultaneous operation of lead screw and feed shaft feed
  • Oil-bath lubricated main drive and feed gear
  • Double-walled apron box with oil-bath lubrication
  • All guide ways are adjustable
  • 3-axis position indicator
    • More accuracy
    • Lower error rate
    • Increased productivity
    • Resulting in valuable time savings
    • For increased productivity
    • Easy to read display
    • Operator-specific features
    • Convenient keyboard layout
    • Resolution: 0.0004 / 0.0002"
    • Default coordinates
    • Axis position is maintained when display is turned off
    • Hole circle pattern calculation
    • Calculator function
    • Storage for 10 tools
    • Radius / diameter toggle
    • Mm/inch conversion
    • Easy expansion and maintenance-free operation
    • Display for top (Z0) and box way slide (Z1) both separate and in differential / cumulative mode for lathes

Standard Equipment

  • 3-axis position indicator
  • 3-jaw chuck Ø 6"
  • 4-jaw face plate chuck Ø 8"
  • Face plate Ø 11"
  • Quick change tool holder head WE
  • Quick change tool holder WED 20100
  • Steady and follow rests
  • Fixed splash guard (wall)
  • Chuck guard
  • Foot brake pedal
  • Base
  • Work lamp
  • Dead center
  • Operating tools
  • Operator instructions

Specifications

  • Working Area
    • Turning diameter over bed: 13”
    • Turning-Ø over support: 8”
    • Center width: 39.37”
  • Travels
    • Travel X-axis: 6.7”
    • Travel Z1-axis: 4”
    • Swing range of top slide: ± 360°
  • Headstock
    • Spindle mount: Camlock D1-4
    • Spindle speed: 70 rpm - 2000 rpm
    • Spindle bore: 1”
    • Spindle speed-stages: 8
    • Spindle taper: 5 MT
  • Feed
    • Feed X-axis: 0.00055”/R - 0.01496”/R
    • Feed Z-axis: 0.00205”/R - 0.0548”/R
  • Tapping
    • Tapping, withworth: (34) 4-56 TPI
    • Tapping, metric: (26) 0.02-0.3
  • Tailstock
    • Tailstock taper: 3 MT
    • Tailstock quill stroke: 4”
    • Tailstock quill diameter: 1”
    • Tailstock traverse adjustment: ± 0.5”
  • Drive Capacity
    • Motor rating main drive: 2 Hp
  • Measures and Weights
    • Overall dimensions (length x width x height): 73” x 27” x 52”
    • Weight: 1,144 lbs.