Features
- Machine Frame and Drive System
- The machine frame is made of a very rigid, solid steel weldment
- The upper knives are reversible for use of both sides, and the lower knives feature 4 cutting edges
- A rigid, continuous hold-down fixes the sheet metal plate right in front of the cut line
- The optimum kerf for machining can be adjusted manually
- Material Support
- The rigid side angle stop simplifies alignment of the plate to the cut line
- Rugged support arms ensure a strong hold of large plates
- Material support rollers are recessed in the table for easy workpiece handling
- Ergonomic Design
- The mobile foot switch gives the operator added flexibility and both hands are free for handling the workpiece
- For a better view of the cut line, the hand safety guard can be flipped up or down
- The bright LED illumination of the cut line creates a clearly visible shadow on the marked line
- Rear stop
- The motorized back gauge ensures precise positioning in automatic, semi-automatic and manual modes
- The NC-controlled back gauge can be easily and quickly programmed
- The easy accessible work area at the back gauge is secured by light curtain
- The machine can be equipped with an optional NC-controlled back gauge for a length up to 39", or a sheet hold-up device
- Solid steel weldment
- NC-controlled back gauge can be easily programmed
- Automatic, semi-automatic, and manual mode
- Blades with multiple cutting surfaces
- Manual kerf adjustment
Standard Equipment
- BRL NC controller
- Motorized rear stop (29 inch)
- Manual blade gap adjustment
- Foot pedal
- Cut-line lighting
- Light curtain
- Lateral stop
- Support arms with T-slots and tilting stop
- Ball bearing front table
- Top blade with 2 sides
- Finger guard
- Operator instructions
Controls & Software
- Encoder signal between 5 VDC and 30 VDC
- Toggle between inch/metric
- Measuring range 0 - 10 m
- 0.004 mm sensitivity (adjustable)
- Automatic, semi-automatic operation, and manual mode can be selected
- Up to 10 positions can be saved
- Machining in single mode is possible as well
- Stroke can be limited on both sides
- Dual positioning speed
- Warnings and error message display
- Programmable push buttons
- Retraction is possible during the cutting process
- Saves the set position values and counts upon shut-down
Specifications
- Working Area
- Working length: 120”
- Cutting angle: 1.3 deg
- Work table height: 32”
- Structural steel plate thickness: 0.004” - 0.157”
- Plate thickness stainless steel: 0.079”
- Work table depth: 18”
- Number of support arms: 4 positions
- Support arms: 37”
- Back Gauge
- Rear stop: 30”
- Drive Capacity
- Motor rating main drive: 10.1 Hp
- Measures and Weights
- Overall dimensions (length x width x height): 146” x 85” x 58”
- Weight: 8,800 lbs.
Options
- Expansion for up to 100 programs with 10 adjustable values each
- 256816 – Motorized back gauge 39.3" (BRL 401.2 NC)
- 253666 – Adjustable angle stop 0-180° for KMT S
- 253667 – Pneumatic sheet hold-up device for KMT S
