Calling all mini machine shop enthusiasts! This stout little multi-purpose machine is a small, yet robust lathe and mill combination that is great for creating small projects. The lathe cuts inch and metric threads and comes with a 3" three-jaw scroll chuck. The compound rest features a 4-way turret tool post and the cross slide conveniently acts as a mill table with two 5/16” T-slots for work-holding. Accurate and repeatable, the mill has an adjustable head, a fine down feed clutch, and comes with a JT2 drill chuck with arbor. Turn, mill, and drill precise little parts with the G0937 Lathe/Mill Combo.
Lathe Specifications
- Swing over bed: 6"
- Swing over cross slide: 3"
- Distance between centers: 10"
- Carriage travel: 10"
- Cross slide travel: 2-7/8"
- Tailstock quill travel: 1"
- Variable spindle speed: 100-2000 + 10% RPM
- Inch thread range: 16 – 24 TPI
- Metric thread range: 0.1-1.25mm
- Spindle hole taper: MT2
- Tailstock taper: MT1
Mill Specifications - Distance from spindle to table: 4-1/2"
- T-slots: two 5/16" width, 1-3/4" spacing
- Table dimensions: 3-1/2" x 5-1/2"
- Variable-speed spindle: 100-1300 + 10% RPM
- 1-1/8” Spindle travel
- Drilling Capacity: 3/8" (steel)
Motor & Body Specifications - Lathe Motor: 1/5 HP, 110V, single-phase 1.8A
- Mill Motor: 1/5 HP, 110V, single-phase 1.8A
- Footprint: 12" x 42"
- Dimensions: 12" x 22" x 21"
- Approx. shipping weight: 91 lbs.
Features - Cross slide doubles as mill table
- Coarse and fine mill spindle down feed
- 4-Way turret tool post
- Cuts inch and metric threads
Includes - 3" Three-Jaw Scroll Chuck
- 4-Way turret tool post
- 1/2" Drill chuck with arbor
- JT2 Drill chuck with arbor
- MT2 chuck arbor
- MT1 dead center
- Set of change gears
- Service tools
